[. . . ] It is not a substitute for responsible and proper adult supervision and should not be used as such. Make sure the Baby unit and adapter cable are always out of reach of the baby, at least 1 metre away. [. . . ] Connect the AC power adapter (A­9) to an AC mains socket, and then connect the cord to the DC power supply socket (A­5) of the Baby unit. If you want to use batteries, remove the battery compartment cover (A­8) using a screwdriver. The Baby unit operates cordlessly for up to 30 hours on fresh batteries. Note: To switch off the Baby unit completely set the mode switch (A­6) to OFF. Connect the AC power adapter (B­8) to an AC mains socket, and then connect the cord to the DC power supply socket (B­4) of the Parent unit. If you want to use batteries, remove the battery compartment cover (B­5). If the Parent unit is operating on batteries, you can carry it around giving you freedom of movement while still monitoring your baby. Use the belt clip (B­7) to attach the unit to your clothing and so keep your hands free. Mobile or cordless phones too close to the baby monitor can cause interference. Only use the AC power adapter included or a type that complies with safety standard EN60950 and that has the following specification: 9 Volt DC / 200mA. ­ up to 150 metres in ideal conditions (walls and floors can limit this distance). ­ Continuous communication link (hidden signal ensures a continuous link between both units so you only hear your baby's sounds). [. . . ] ­ Continuous communication link (hidden signal ensures a continuous link between both units so you only hear your baby's sounds). Koppla växelströmsadaptern (A­9) till ett växelströmsnätuttag, och anslut sladden till likströmtillförseluttaget (A­5) på babyenheten. [. . . ]